You also need to have a valid Cisco IOS software image for your router.Step 2 Download the Cisco IOS software image onto your workstation or PC. The TFTP Server application included on the software feature pack CDs is also available on .Ĭ. For other operating system s, a number of TFTP or rcp applications are available from independent software vendors or as shareware from public sources on the World Wide Web. Note The TFTP server included on the software feature pack CD-ROM can be used on a PC running Windows 95. Most TFTP applications provide a setup routine to assist in these configuration tasks. This is the directory in which the Cisco IOS software images are stored (see Step 2 below). Configure the TFTP application to operate as a TFTP server, as opposed to a TFTP client.ī. After the application is installed, a minimal level of configuration must be performed.Ī. Perform these steps prior to installing or upgrading Cisco IOS software:Ī TFTP server or a RCP server application must be installed on a TCP/IP-ready workstation or PC. The information in this document describes Cisco IOS Release 11.2 or later.
This appendix explains how to install Cisco IOS software onto "run-from-RAM" Cisco routers using a TFTP server or remote copy protocol (rcp) server application. Sample Output-Cisco uBR7200 Series RouterĬopying a System Image from One Device to AnotherĬopying from Device to Device Inside the Same Router Installing or Upgrading Cisco IOS Software Installing or Upgrading Cisco IOS Software Table Of Contents
0 kommentar(er)
